Stainless steel hexagon socket set screw

The stainless steel set screw is mainly used to fix the relative position of machine parts. When using, screw the stainless steel set screw into the screw hole of the machine part to be fixed, and press the end of the set screw on the surface of another machine part, even if the previous machine part is fixed on the next machine part. Slotted and stainless steel hexagon socket set screws are used on the parts where the nail head is not allowed to be exposed. Slotted stainless steel set screws have a smaller compression force while stainless steel hexagon socket set screws have a larger compression force. Tapered stainless steel set screws are suitable for the machine parts with low strength; The stainless steel set screw without sharp cone end is applicable to the machine parts with pits on the compression surface to increase the load transmission capacity; Flat end set screws and concave end set screws are applicable to parts with high hardness or frequently adjusted position; The stainless steel set screw at the column end is applicable to the tubular shaft (on thin-walled parts, the cylindrical end enters the hole of the tubular shaft to transfer large load, but there should be a device to prevent the screw from loosening when using.